SIP Speedometer Vespa GTS300
The SIP Speedometer/Rev Counter replaces the minimally equipped original speedometer unit with a state-of-the-art multifunctional instrument. This speedometer has an impressively large analogue display for either the scooters speed (up to 160 mph/kph), or that of the motor (up to 16 000 rpm). This means that the speedometer needle can be programmed to display either your current revs or speed.
The digital display, located in the lower half of the speedometer face, can be used to show 18 different functions, which are scrolled through using the vehicles “Mode”-button. Alongside the standard analogue/digital vehicle and motor speed measurements this speedometer also has a trip counter/total mileage function, motor and ambient temperature measurement, acceleration sensor for distance and speed measurement, average speed and many more innovative features (see function list below).
The colour of the backlight can be set in eight different colours and its brightness is also adjustable. During every ignition sequence the speedometer conducts an automatic diagnostic check.
The scooters road speed can be determined by using either the original speed sensor which is built-in the vehicles wiring harness or a digital sensor system, which is separately available.
A complete wiring loom adapter is included in the kit. This makes it simple to install, with no soldering necessary!
Analogue speed : 0-160 mph/kph
Digital speed : 0-260 kph
Analogue revs : 0-16000 rpm
Digital revs : 0-16000 rpm
Total mileage : 0000-999999 miles/km
Trip distance A & B : up to 9999.9mph/kph
Trip time A & B up to 99.59 h
Battery charge level (incl. under voltage warning)
Programmable total mileage (allows synchronisation with original vehicle mileage)
Average speed between A & B up to 160 mph/160 kph
Five different illumination levels for back light
Choice of eight back light colours available
Digital fuel level warning (indicated through flashing fuel display & fuel light)
Digital Clock (12h/24h)
Thermometer overtemperature warning (Warning, the whole bar including the temperature symbol will flash.)
Temperature measurement for cylinder head/spark plug up to 250°C/32° - 482°F, an separate sensor for the spark plug temperature is also included in the kit
Data storage facility for top speeds, maximum rpm and temperatures
Trip and acceleration measurement
The trip measurement can be made for a distance between 0-1000 metres. The acceleration measurement can be made over a freely chosen speed range.
Attention : In order to retain the full guarantee on the SIP Speedometer/Rev-Counter all work, repairs or replacement of the lens cover must either be carried out here at SIP Scootershop or an approved workshop. All other modifications, such as attempting to open the housing invalidates our guarantee!